pre-shrinking machine

Question

As one of the best mechanical shrinking machine manufacturers in China with a good reputation, Prosperity Textile Machinery is able to offer you customized mechanical shrinking machine. Welcome to visit our website. Mechanical shrinking machine   Machine Process: Open width fabric entry weft straighter→moisture unit→rubber blanket pre-shrinking unit→felt finishing unit →cooling water drum→plaiter Application: The machine is applicable to the pre-shrinkage and finishing for fabrics.It can reduce shrinkage, stabilize size and improve the hand touch of fabrics. Main specifications: Nominal machine width range: 1600-3600mm Mechanical speed: 5-100m/min Driving mode: frequency conversion Control device: PLC Pre-shrinkage rate：12-16% Machine structure: Moisture device unit It mainly consists of fabric tensioner, fabric feed roller, straighter roller; 01pcs SS moisture tank, high pressure nozzle, Danfoss brand, strong injection, good atomization. Rubber blanket pre-shrinking unit Eliminates fabric inner shrinkage stress , finish fabric pre-shirinkage process. The rubber blanket thickness is 67mm, USA DAYTEX or DUNLINE brand, hardness is Shore-A38±2° The dia. of the heating pressure roller is 616mm and the max.pressure is up to 0.50Mpa. 23mm thickness  SUS 304 stainless steel roller ensure the high preshrinking rate. Pressing roller, tension roller,guide roller and water squeezing roller are made of seamless pipe compounded  with SUS304 sheet Diameter of pressing roller is 220mm, the steam trap in rubber blanket unit is chosed from SpiraxSacro. UK The sueding roller driven by motor individually is used to grind the rubber blanket. The pressing roller and tension roller are driven by motor, reduce the labor cost. Security devices Emergency stop switch Infrared photo-electronic safe switch Pressure roller astern device The wall plate of rubber takes hot galvanizing process to improve anti-corrosion level, prolong machine lifespan. Felt finishing unit drying the fabric to keep the stability of preshrinking effect and improves the hand touch of the fabric The specification of the felt: 2500g/㎡needled felt big cylinder dia.2500mm is made of MS plate rolled. 2pcs drying drums in dia.800mm, SS material. Bias-correcting roller is controlled and adjusted by air cylinders via the photo-electricity switch, the roller moves up and down to correct the bias of the felt. one pcs cooling water drum with dia.570mm in the fabric outlet, driven by double rows chain. The plaiter outlet The felt is chosed  Morison brand (joint venture with USA). mechanical shirinking machine processpre-shrinking machine website:http://www.chinapros-machine.com/sanforizing-machine/