Pultrusion is a manufacturing process for converting reinforced fibers and liquid resin into a fiber-reinforced plastic, also known as fiber-reinforced polymer (FRP). The pultrusion process allows continuous production of FRP structural shapes in an automated, energy-efficient process by pulling fiberglass rovings through a resin bath or resin impregnator that completely saturate the reinforcements. The resin hardens from the heated steel pultrusion die, resulting in a strong, lightweight final product that follows the shape of the die.
Pultrusion Process
Pultrusion machine design can vary as part geometry can differ. The two main types of pulling systems used to create FRP profiles are reciprocating (hand-over-hand) and continuous (cat-track).
The rovings of fiber reinforcements are positioned by the creels for continuous feeding onto the guide plate. To ensure strength and quality, the fiber reinforcements must be positioned accurately within the finished composite.
The resin impregnator is optimally designed to completely saturate the fiber reinforcements in a resin bath or wet out that consists of either epoxy, polyurethane, polyester or vinyl ester. Fillers and other additives such as colors, fire inhibitors and UV retardants can be included to improve the lasting performance of the composite.
As the reinforcements exit the resin impregnator, they’re passed through “pre former” tools, designed to squeeze out surplus resin and organize the fiber reinforcements into the correct shape. During this process, additives such as continuous strand materials and protective surface veils are often included to improve the structure, resistance to corrosion and finish of the final product.
After this process, the resin impregnated fiber passes through the steel die for polymerization. The die is heated at a consistent temperature to cure the thermosetting resin, resulting in a solidified polymer.
The hardened FRP is then pulled towards the saw by the pulling system for accurate cutting to the desired length. The pull locks are custom made of urethane to ensure cured profiles aren’t cracked, distorted or deformed by the pulling system.
Products manufactured under this technology are widely used in the following industries:
In the agriculture and chemical industries for manufacturing of chemically resistant to aggressive media slatted floors with enhanced strength characteristics used in the construction of livestock facilities, chemical plants, etc.;
in the construction industry for the production of glass-fiber reinforcement, profiles, carcasses, stiffening bars for PVC-windows, etc.;
in the sports and tourism industries for manufacturing of equipment exhibiting enhanced strength properties: skis, ski poles, golf course flagsticks, tent and hovel constructions, etc.;
in electrical power engineering for manufacturing of dielectric structures, fiberglass rods used in composite insulators and as supporting structures for elements of signaling blocks, and fiberglass profiles used in manufacturing of transformers and electric motors;
and in many other industries and plants, using mechanisms, structures and materials, which meet high standards of chemical, dielectric and strength stability.
What’s the difference between the use of GRE pipe and GRP pipe in ship pipeline
GRP is used for ballast water pipes, but GRE is used in seawater pipelines. These two kinds of pipes are used more and more, but what is the difference between the specific applications?
FRP is the general term for glass fiber reinforced composite materials, that is, the general term for glass fiber reinforced plastics, which contains GRE and GRP.
